Your floor scrubber can keep your workplace squeaky clean, but only if you take proper care of it. With the right maintenance service, its life will be prolonged, and you will save lots of money and time. It is recommended that you get regular preventative service for your floor scrubber machine. However, there are a few things that you can do in order to ensure the best cleaning results and safe usage of the machine. Read on to find out what they are.
Before You Use the Machine:
- Check the Battery
Make sure that the battery of the scrubber machine is fully charged before you start it. This way, you can make sure that the machine is at the maximum energy level and performing best. Charge the battery if it isn’t full.
- Check the Scrubbing Pad or Brush
In case the machine’s scrubbing pad or brush is burned out, you will not get the shiny, clean floors you are expecting. To make your job easier, always check the pad or brush before starting the machine. If they aren’t in proper condition, replace them.
- Check the Squeegee Blade
In order to clean the floor, it is crucial to have a robust squeegee blade. If it’s worn out, cleaning will be much harder than it has to be. However, squeegee blades wipe in the same direction. So, if they are worn out, you can turn them around to prolong their life. This way, you don’t have to buy a replacement immediately.
- Empty the Recovery Rank and Clean the Screen
Cleaning the floors using a scrubber machine doesn’t have to take hours. You can wait until the recovery tank of the industrial floor scrubber is empty and then start cleaning. If there is leftover water, it will mean that the tank will fill up faster, and you will have to empty it. Also, make sure that you have a clean screen that is ready to use.
- Check the Head Skirt
In case the scrubbing head skirt has taken some damage, it is highly likely that you will face some trouble while working. But, if you want to avoid this, all you need to do is take a look at it before you start working. If it is worn out, replace it.
- Fill the Tank
Dirty water will lead to unclean floors. You have to start fresh every time. Fill the solution tank with clean water and cleaning agents approved for industrial scrubbing.
After You Use the Machine:
- Empty the Recovery and Solution Tank
All the dirt cleaned off from the floors has to be removed. For this, turn off the machine, straighten the pipe, remove the cover, keep the pipe in a drain, and empty the tank. Clean the tank before storing the scrubber machine. Rinse it thoroughly and make sure that there is no residue left that could cause long-term issues.
- Clean the Solution Tank Filter
While cleaning the solution tank, you have to clean the filter as well. This will remove all the dirt and ensure that it doesn’t cause any issues with the system.
- Clean the Brush, Squeegee Blade, and the Machine
If any of these components are worn out, it is crucial that you replace them. Clean them thoroughly and remove all the dirt. For the machine, you can use a damp cloth and an all-purpose cleaner.
- Recharge the Battery
Recharge your machine’s battery after it has been used for more than 30 minutes. This way, it will be ready for use next time. In case the machine requires a deep-cycle battery, you have to ensure that the water level is correct.
And this is it! With these few simple maintenance tips, you can ensure that your floor scrubber machine remains in optimal condition for a long time.